> Large 194mm (7.6 inch) diameter blade shaft for increased strength and superior balancing
> Blade shaft runs on 60mm dual race SKF bearings with external access
> 194mm Diameter rear roller running on 45mm bearings
> High discharge design to increase ground speed
> Spiral placement of cutting blades to maximise the efficiency of the machine reducing the power required to drive the mower
> Ability to set extra high cut (up to 100mm) which is ideal for heavier conditions as well as areas where there may be objects protruding out of the ground such as rocks or tree stumps
> When fully side shifted to the non-belt side the cut will extend 1,500mm from the tractors centreline
> When fully side shifted to the belt side the cut will extend 1,300mm from the tractors centreline

---

SPECIFICATIONS

Horsepower 70-130hp
Cut Width 2,400mm
Cut Height 50-100mm
Sideshift Hydraulic
Blade shaft 194mm
Qty blades 34
Std blades Hammer type
Belts 5 X B Section
Bearing SKF
Deck thickness 6mm
Hitch pins CAT 2
PTO rpm 540
Overall width 2,710mm
Weight 1,090kg

---

> The PTO shaft is included in the price
> The gear box and shaft require oil, to ensure the unit is filled in the correct location/s, to the correct level with the correct oil we suggest having us fill it at a charge of $20 inc gst
> The product is shipped in a steel frame to enable cost effective freight therefore some assembly is required
> 12 months manufacturing warranty (Excludes consumables such as blades & belts) and 24 months gearbox warranty